J41 TAPPING CHUCK
This device is consisted of a tap chuck and tap collets.The chuck has compensating device for thread pitch. Collet chuck has overload torque protection device,which avoid tap breaking.In order to get the different release torques for different diameter taps,just adjust nuts.This device is most applicable to tap working on drill, lathe,boring machine,milling machine and CNC machine center and so on.
订单号 Order No. | 柄部锥度 Shank taper | D mm | D1 mm | d mm | L1 mm | L mm | 夹持范围 Tapping range | 最大扭矩 Torque Nm | 重量 Wt(kg) |
J4112-MS2 | MS2 |
46 | 17.780 |
19 | 75 | 171.5 |
M3-M12 |
25 | 1.08 |
J4112-MS3 | MS3 | 23.825 | 94 | 191 | 1.28 | ||||
J4112-MS4 | MS4 | 31.267 | 117.5 | 216 | 3.00 | ||||
J4116-R8 | R8 | 31.75 | 101.6 | 193.6 |
M3-M16 |
46.3 | 1.71 | ||
J4116-MS2 | MS2 | 17.780 | 75 | 171.5 | 1.08 | ||||
J4116-MS3 | MS3 | 23.825 | 94 | 191 | 1.61 | ||||
J4116-MS4 | MS4 | 31.267 | 117.5 | 216 | 3.00 | ||||
J4124-MS3 | MS3 |
66 | 23.825 |
30 | 94 | 227 |
M12-M24 |
150 | 3.20 |
J4124-MS4 | MS4 | 31.267 | 117.5 | 252 | 3.60 | ||||
J4124-MS5 | MS5 | 44.399 | 149.5 | 284 | 4.50 |
12型攻丝范围 Tapping range | M3 | M4 | M5 | M6 | M8 | M10 | M12 |
67型d1×a(mm) | 4×3 | 4×3 | 5×3.8 | 6×5 | 6×5 | 8×6.3 | 9×7.1 |
83型d1×a(mm) | 2.24×1.8 | 3.15×2.5 | 4×3.15 | 4.5×3.55 | 6.3×5 | 8×6.3 | 9×7.1 |
24型攻丝范围 Tapping range | M12 | M14 | M16 | M18 | M20 | M22 | M24 |
67型d1×a(mm) | 9×7.1 | 10.5×8 | 12.5×10 | 14×11 | 16×12 | 18×14.5 | 20×16 |